ZP3 Series Pumps

EVERY ZP3 PUMP INCLUDES THE FOLLOWING FEATURES AS STANDARD:

• 304 stainless steel gearcase.
• Stainless splash plate reducing damage to bearings from water intrusion during the wash-down process (this is a major cause of bearing failure).
• Stainless bearing retainers.
• 17-4 PH shafts
• Helical gears.
• 4-way mounting
• Threaded grease zerks
• Anti-microbial lube and gasketed stainless steel clean-out plugs at no-charge.
• The ZP3 Series is EHEDG Certified and in conformance with 3A sanitary standards and the ATEX directive.

Existing ZP2 and competing models can be upgraded to a ZP3 design with new rotors, seals and re-machining the existing rotor case in as little as 2 weeks.

Whether you simply want to replace your existing ZP1 / ZP2 style pump or you prefer to upgrade to Ampco’s new ZP3 design with improved CIP-ability and ease of maintenance, Ampco’s ZP Series is the smart choice.

THE ZP3 SERIES INCLUDES THESE EXCITING FEATURES:

• Front-loading seals are located closer to the product flow, offering improved CIP-ability with no disassembly required.
• Front-loading seals allow for ease of maintenance and reduced service time.
• As opposed to our competitors’ similar pumps, this seal is a better balanced design which generates less heat and promotes longer seal life.
• Cover design maximizes exposure of the cover o-ring to the CIP fluid.
• Free drain design improves CIP-ability while maintaining maximum pump efficiency.
• CIP holes in rotor ensure turbulent flow to the cover hub.
• Elimination of dead zones in body bore improves cleanability and increases seal life.
• The ZP3 pump is mounted on a ZP2 gear case, including shafts, to maximize parts interchangeability.
• Existing ZP2 pumps (and our competitors’ similar pumps) can be upgraded to the ZP3 design with new rotors, new seals and re-machining the existing rotor case.
• New pumps can be reconditioned 2 to 3 times.

REMANUFACTURING PROGRAM

ZM Technologies offers remanufacturing services for ZPl, ZP2, ZP3 Series pumps and competing models Universal 1 & 2. The pumps are rebuilt with oversized rotors to extend the useful life of the pump. A remanufactured pump includes new shafts, gears, bearings, rotors and a full one-year factory warranty. Pumps can be remanufactured in two weeks and are 30% less than the cost of a new pump.