Z Series Pumps

Z series pumpAll K, Z, R Series pumps feature a heavy-wall construction with tight manufacturing tolerances, a high-efficiency design with fully-shrouded, dynamically-balanced impellers, and close-coupled on JM, 56J, IEC frame motors. The standard seal is a T21 single mechanical with ceramic seat, carbon rotating element, Buna elastomers and 304SS metallics. Other seal options are available upon request.

These pumps can be ABS (American Bureau of Shipping) type approval. The pumps are available with capacities from 5-3000 GPM, 1-680 m3/h. A bearing frame mounting is available.

These heavy duty, high efficiency Z Series pumps with 150# ANSI flanges are available from stock in three alloys – nickel aluminum bronze, 316 stainless steel and duplex 2205 stainless steel. All Z Series pumps have ABS design approval.

The Z Series Pumps provide:

  • Pressure up to 175 psi, 12 bar
  • Temperatures up to 250°F, 120°C 
  • Multiple seal options Internal Seal flush 
  • Replaceable wear rings
  • Close-coupled to NEMA or IEC motor

DOCUMENTS

Not Applicable

ZC2 1-1/2 x 1-1/4 Bronze Curves     1750 2900 3500 Data Sheet
ZC2 1-1/2 x 1-1/4 Stainless Steel Curves     1750 2900 3500 Data Sheet
ZC2/ZCH2 1-1/2 x 1-1/2 Curves     1750 2900 3500 Data Sheet
ZC2 2 X 1-1/2 Curves     1750 2900 3500 Data Sheet
ZC2/ZCH2 2 X 2 Curves     1750 2900 3500 Data Sheet
ZC2 2 1/2 X 2 Curves     1750 2900 3500 Data Sheet
ZC2/ZCH2 3 X 2 Curves     1750 2900 3500 Data Sheet
ZC2/ZCH2 3 X 2-1/2 Curves     1750 2900 3500 Data Sheet
ZC2/ZCH2 4 X 3 Curves     1750 2900 3500 Data Sheet
 ZC2/ZCH2 4 X 3C Curves     1750 2900 3500 Data Sheet
 ZC2/ZCH2 4 X 3L Curves 1150 1450 1750     Data Sheet
 ZC2/ZCH2 5 X 4 Curves 1150 1450 1750     Data Sheet
 ZC2/ZCH2 5 X 4P Curves     1750 2900 3500 Data Sheet
 ZCH2 6 X 6 Curves 1150 1450 1750     Data Sheet
ZCH2 8 X 6 Curves 1150 1450 1750     Data Sheet
ZCH2 8 X 6 M Curves   1450 1750     Data Sheet

 

Discover High Quality, Cost-Effective, Innovative Solutions at ZM Technologies!

Resource Links